1. The Portable Edge Bander can finish wooden edge frames at
straight edge, inside the arc,outside the arc,curve and circle, the
radius of the inside arc above 15mm
2. The Portable Edge Bander are using all types of banding at a
wide range of widths and thickness, the banding material can be
melamine paper banding, wooden veneer, vinyl(PVC or ABS)
self-adhensive edge banding. The thickness of the edge banding
within 0.3mm to 3.0mm. The minimum/maximum width of the edge band
is 10mm to 40mm.
3. The Portable Edge Bander is light so it can be used for large
sized wooden boards as well as incomplete wooden products. The
board can be fixed in place while the edge bander is in operation.
The length of frame is not limited. It can also be used for small
sized wooden boards where the machine is fixed onto a conveyor belt
or table with a stand. The process of edge banding is the same as
normal banding work..
4.The Portable Edge Bander is suitable for medium to low
temperature hot melt adhensives(melting point below 200). The
temperature of the tank can be controlled with adjustable
temperature control according to different banding thickness and
material. The warm up time takes 10minutes.
5. The machine speed is fixed at four meters per minutes.
6. All electronic component of machine comply with UL and CSA
certification. The entire machine complies with CE certification
Mini radius of banding
Benting material of melamine,veneer and plastic tapes
Thickness of banding
0.3 to 3.0mm
Width of banding
Shape of Workpiece
Straight and irregular