This machine is designed and manufactured by this company and is a
patented product. It is mainly used for trimming the corner, banded
after the general edge banding and cutting the excess of the edge
band. This machine is originated from the headquarters in
Main characteristics: small, efficient, inexpensive, reliable and
(2)User guide :
<a>.This machine has been configured and ready to be used
directly after delivery. Standard : the thickness of the cutting
edge is 2mm; the guide strip and fence are perpendicular (at
90°)(NB: It is adjustable); the rounding bit is adjusted as the
standard of 2mm thickness. It can also be adjusted according to the
thickness of the edge bander and the adjustment range is 0.4mm to
<b> When you take the machine out of the packaging, please
take the G-type clamp under the safety guard off first. Connect the
electricity and air resource, then switch on the power and the air
compressor for working.
To use this machine:
1. Ensure the machine is on a even, stable surface.
2. Switch the power on.
3. Place the edge to be worked on along the edge of the guide strip
and push it down and forward along the table of the machine (toward
4. When the item hits the mini-switch, the router will come down
and cut off the end. Ensure you keep a firm hold down on the item
(until it finishes) to cleanly cut with no deformities.
NEVER OPEN THE SAFETY GUARD AND/OR COVER OF THE MACHINE WHILST